So I started on the rear body section this past week, a previous owner had cut a massive duct into the side of the car to try and cool the rear mounted radiator. Luckily it was constructed out of filler and chicken wire so a bit of work with a jigsaw and a rubber mallet and it was off. After cleaning up the area I screwed/clamped a piece of hardboard with some wax release agent on it over the hole. That meant I could now glass over the hole.
Subscribe to:
Post Comments (Atom)
Lining everything up
Well here it is! I got my tub delivered by Derek Hambly at the beginning of the month, and what a fine job it is too. Made mostly from 20s...
-
So I started on the rear body section this past week, a previous owner had cut a massive duct into the side of the car to try and cool the ...
-
The original Cox GTM had 2 Mini front subframes bolted into the monocoque, one at the front had standard Mini components but the lower arms ...
-
I am starting this blog as for 2 reasons, one is to have a record of what happened but mainly as a source for others that they may find...
No comments:
Post a Comment